Skip to content
Santa Cruz, Laguna · Serving CALABARZONLet's talk: +63 961 903 9184

10 Disadvantages of AAC Blocks in the Philippines: What Homeowners Should Know Before Building

Autoclaved Aerated Concrete (AAC) blocks are becoming an alternative walling material for residential and commercial construction in the Philippines.

Known for their lightweight composition, thermal insulation properties, dimensional consistency, and potential installation efficiency, AAC blocks offer several advantages over conventional masonry materials.

However, like any construction material, AAC blocks also have disadvantages and limitations that homeowners should understand before choosing them for a project.

Some of the most important concerns include higher initial material costs, moisture absorption, specialized installation requirements, compatibility with finishing materials, and the need for properly designed wall connections.

These limitations do not automatically mean AAC is a poor construction material.

Instead, they highlight the importance of selecting the correct product, following manufacturer-approved installation procedures, and coordinating the wall system with the architectural and structural design.

For Filipino homeowners comparing AAC with traditional concrete hollow blocks (CHB), understanding both the advantages and disadvantages is essential.

Here are ten potential disadvantages of AAC blocks and how they can be addressed.

1. Higher Initial Material Cost

One of the most common concerns about AAC blocks is their purchase price.

Compared with conventional CHB, AAC blocks often have a higher initial material cost.

Why AAC Can Cost More

AAC blocks require a specialized manufacturing process involving controlled mixing, aeration, cutting, and autoclave curing.

The product is manufactured under controlled conditions to achieve its specified density, dimensions, and performance characteristics.

Does Higher Material Cost Mean Higher Total Construction Cost?

Not necessarily.

AAC blocks may offer installation and finishing efficiencies that partially offset the higher block price.

However, the actual savings depend on:

  • Labor productivity
  • Block dimensions
  • Adhesive consumption
  • Finishing requirements
  • Delivery costs
  • Wall layout
  • Project location

How to Manage the Cost

Compare complete installed wall costs rather than individual block prices.

A proper estimate should include blocks, adhesive, reinforcement, anchors, jambs, lintels, finishes, labor, and delivery.

2. Higher Water Absorption

AAC contains numerous air pores that contribute to its lightweight characteristics.

However, its porous structure can also absorb water.

Why Moisture Matters

Excessive or prolonged moisture exposure may affect wall performance and finishing materials.

Potential concerns include:

  • Damp surfaces
  • Coating deterioration
  • Staining
  • Moisture-related finishing defects

Is AAC Suitable for Philippine Weather?

AAC can be suitable for Philippine construction when properly specified and protected.

However, exterior AAC walls require appropriate weather-resistant finishing systems.

How to Reduce Moisture Problems

Use manufacturer-approved exterior renders, coatings, and waterproofing details where required.

Properly detail window openings, roof-to-wall connections, and other areas exposed to rainfall.

3. Requires Specialized Installation Methods

AAC installation differs from conventional CHB construction.

Some AAC systems use thin-bed adhesive, specialized cutting tools, and specific wall-connection details.

Why Installation Experience Matters

Installers unfamiliar with AAC may use inappropriate methods.

Examples include:

  • Excessively thick mortar joints
  • Incorrect adhesive application
  • Poor block alignment
  • Inadequate wall anchors
  • Improper cutting
  • Unsuitable surface finishing

How to Avoid Installation Problems

Use trained installers and follow the selected manufacturer’s installation manual.

The construction team should understand the approved wall details before beginning installation.

4. More Sensitive to Improper Handling

AAC blocks are relatively lightweight, but their edges and corners may be vulnerable to chipping during rough handling.

Common Handling Problems

  • Chipped corners
  • Broken edges
  • Damaged blocks
  • Material waste

Why This Matters

Excessive damage may increase cutting, repairs, and material consumption.

How to Reduce Damage

Store AAC blocks on suitable supports, protect them during transportation, and follow manufacturer handling recommendations.

5. Requires Compatible Finishing Materials

AAC walls should not automatically be finished using the same materials and methods as conventional CHB walls.

Why Compatibility Matters

AAC has different absorption and surface characteristics.

Unsuitable finishing materials may contribute to:

  • Poor adhesion
  • Cracking
  • Delamination
  • Uneven surface appearance
  • Moisture-related defects

How to Finish AAC Properly

Use manufacturer-approved primers, renders, skim coats, adhesives, and coatings.

Surface preparation and application thickness should follow the selected system.

6. Cracking Can Occur With Poor Detailing

AAC walls can develop cracks when subjected to movement, improper connections, or unsuitable installation practices.

Common Causes of Cracking

Potential causes include:

  • Structural movement
  • Improper wall anchorage
  • Inadequate movement accommodation
  • Poorly detailed openings
  • Incompatible finishing materials
  • Improper jointing

Are AAC Blocks More Likely to Crack Than CHB?

Not necessarily.

Both AAC and CHB walls can develop cracks when improperly designed or installed.

A meaningful comparison requires equivalent wall assemblies and exposure conditions.

How to Reduce Cracking

Follow approved wall connections, jointing, and finishing details.

Structural movement and crack-control requirements should be addressed during design.

7. Special Anchors May Be Needed for Heavy Fixtures

AAC’s lower density can affect the performance of certain conventional anchors and fasteners.

Why Ordinary Anchors May Not Work

Some fasteners intended for dense concrete or masonry may not provide suitable holding capacity in AAC.

Common Wall-Mounted Items

Examples include:

  • Kitchen cabinets
  • Shelves
  • Wall-mounted televisions
  • Water heaters
  • Heavy decorative fixtures

How to Install Fixtures Safely

Use anchors specifically approved for AAC and verify the required load capacity.

Heavy equipment may require engineered supports or connections to structural elements.

Do not assume that ordinary plastic wall plugs are suitable for heavy loads.

8. Supplier Availability May Be Limited

Conventional CHB is widely available in many Philippine locations.

AAC blocks may be more dependent on specialized manufacturers and distributors.

Why Availability Matters

Limited availability may affect:

  • Material lead times
  • Delivery schedules
  • Transportation costs
  • Replacement materials
  • Project procurement

How to Manage Procurement

Confirm supplier availability before finalizing the wall specifications.

Coordinate delivery with the construction schedule and maintain appropriate material allowances.

9. Requires Careful Structural Coordination

AAC blocks are commonly used as non-load-bearing infill walls in reinforced-concrete framed buildings.

However, the appropriate application depends on the product and structural design.

Why Structural Coordination Matters

Wall connections must account for:

  • Structural movement
  • Lateral loads
  • Wall stability
  • Openings
  • Support conditions
  • Seismic requirements

Can AAC Replace CHB Without Changing the Plans?

Not automatically.

Substituting AAC for CHB may affect wall thickness, dead loads, connections, finishing, and other design requirements.

The proposed change should be reviewed by the responsible professionals.

How to Avoid Problems

Use approved architectural and structural details specific to the selected AAC wall system.

10. Acoustic Performance May Not Always Be Better

AAC is sometimes promoted as a sound-insulating wall material.

However, acoustic performance depends on the complete wall assembly.

Why Wall Weight Matters

Mass is one factor influencing sound transmission.

A heavier wall may provide better airborne sound insulation than a lighter wall under certain conditions.

Other Important Factors

Acoustic performance also depends on:

  • Wall thickness
  • Density
  • Finishes
  • Joints
  • Doors and windows
  • Penetrations
  • Flanking transmission

How to Improve Acoustic Performance

Use a wall assembly designed to meet the project’s acoustic requirements.

Do not assume AAC automatically provides better soundproofing than CHB.

AAC Blocks vs. CHB: Disadvantages Comparison

ConsiderationAAC BlocksConventional CHB
Initial material priceOften higherOften lower
Moisture absorptionRequires compatible protectionAlso requires appropriate protection
Installation familiaritySpecialized training may be neededFamiliar to many masons
Handling damageCorners may chipBreakage also possible
FinishingAAC-compatible systemConventional plastering commonly used
Wall anchorsSpecialized anchors may be neededAnchors must suit block and load
Supplier availabilityMore limited in some areasWidely available
Structural coordinationAAC-specific details requiredCHB-specific details required
Thermal performanceGenerally better than dense masonryDepends on assembly
Acoustic performanceAssembly-dependentAssembly-dependent

Neither material is universally superior.

The best choice depends on the project’s structural requirements, performance goals, cost, and construction conditions.

Is AAC Suitable for Exterior Walls in the Philippines?

AAC may be used for exterior walls when the selected product and complete wall system are approved for the application.

Important considerations include:

  • Exterior rendering
  • Weather-resistant coatings
  • Window flashing
  • Roof-to-wall connections
  • Moisture management
  • Movement joints
  • Wall anchorage

A properly designed exterior wall should manage rainwater and allow the assembly to perform as intended.

Is AAC Suitable for Bathrooms and Wet Areas?

AAC may be used in certain wet-area wall assemblies, but appropriate waterproofing and finishing systems are essential.

Tiles and grout alone should not be treated as waterproofing.

The wall system should be compatible with the expected moisture exposure.

Can AAC Blocks Be Used for Two-Storey Houses?

Yes, AAC may be used for suitable walling applications in two-storey buildings.

However, the wall system must be coordinated with the approved structural design.

AAC should not automatically be substituted for load-bearing structural components.

Are AAC Blocks Suitable for Modern Tropical Homes?

AAC’s thermal properties may be useful in Modern Tropical architecture.

However, exterior weather protection, wall detailing, and ventilation remain important.

A climate-responsive home requires more than selecting a thermally efficient wall material.

Are AAC Blocks Suitable for Apartment Construction?

AAC may be considered for apartment partitions and infill walls.

However, the design should evaluate:

  • Fire-resistance requirements
  • Acoustic performance
  • Wall stability
  • Services integration
  • Maintenance
  • Material availability

How Much Do AAC Blocks Cost in the Philippines?

AAC pricing depends on:

  • Manufacturer
  • Block thickness
  • Density
  • Compressive strength
  • Order quantity
  • Delivery location

A proper comparison should include the complete installed wall cost rather than block prices alone.

What Should Be Included?

  • AAC blocks
  • Approved adhesive
  • Wall anchors
  • Reinforcement and connections
  • Jambs and lintels
  • Compatible finishing materials
  • Labor
  • Delivery

The actual cost should be calculated using project-specific quantities and supplier quotations.

When Might CHB Be the Better Choice?

CHB may be more practical when:

  • Budget prioritizes lower initial block cost
  • AAC suppliers are unavailable
  • The construction team is experienced primarily in conventional masonry
  • The project does not require AAC’s specific performance characteristics
  • The approved design is based on CHB and substitution would add complexity

However, the decision should still be based on technical requirements and complete construction cost.

When Might AAC Be Worth Considering?

AAC may be attractive when the project benefits from:

  • Lower wall weight
  • Improved thermal resistance
  • Dimensional consistency
  • Potential installation efficiency
  • Compatible thin finishing systems

These advantages should be evaluated against procurement, installation, and maintenance requirements.

Common AAC Installation Mistakes to Avoid

Before using AAC blocks, avoid:

  • Treating AAC exactly like CHB
  • Using unsuitable mortar
  • Ignoring wall anchors
  • Poorly detailing openings
  • Using incompatible finishing materials
  • Excessive wall chasing
  • Poor moisture protection
  • Changing specifications without approval
  • Using unsuitable anchors for heavy fixtures
  • Ignoring manufacturer instructions

Frequently Asked Questions

What is the biggest disadvantage of AAC blocks?

For many projects, higher initial material cost and the need for compatible installation and finishing systems are important considerations.

Do AAC blocks absorb water?

Yes. AAC is porous and requires suitable moisture protection for the intended application.

Do AAC blocks crack easily?

AAC walls can crack when improperly detailed or installed, but cracking is not unique to AAC.

Can AAC blocks hold kitchen cabinets?

Yes, when suitable AAC-approved anchors or engineered supports are used and the loads are properly assessed.

Are AAC blocks suitable for Philippine weather?

They can be suitable when properly specified, installed, and protected.

Are AAC blocks more expensive than CHB?

AAC blocks often cost more initially, but total installed wall costs depend on materials, labor, finishing, and other requirements.

AAC Wall Construction With Nillasca Construction

Nillasca Construction, based in Santa Cruz, Laguna, provides residential construction and Design and Build services depending on the agreed project scope and location.

For selected projects, walling services may include:

  • AAC and CHB material evaluation
  • Wall layout coordination
  • AAC installation
  • Wall anchorage detailing
  • Reinforced-concrete jamb and lintel coordination
  • Compatible finishing systems
  • Construction quality monitoring

Nillasca Construction has worked with AAC walling systems, including Blocktec AAC products, on selected residential projects.

The actual installation requirements should follow the approved plans and manufacturer specifications.

Planning a House With AAC or CHB Walls?

Whether you’re building a bungalow, two-storey family home, Modern Minimalist residence, Modern Tropical house, apartment, or custom-designed property, selecting the appropriate walling system is an important part of construction planning.

If you’re researching the Disadvantages of AAC Blocks Philippines, prepare your architectural plans, wall dimensions, required thicknesses, project location, and construction budget.

Nillasca Construction can help evaluate suitable walling systems and construction arrangements based on your project requirements.

AAC blocks offer useful advantages, but successful construction depends on understanding their limitations, selecting compatible materials, following approved details, and ensuring quality workmanship.

Nillasca Construction — Crafting Your Vision Into Reality.