Original Duplex with illustrated exterior and coordinated dimensioned 2D, furnished isometric 3D floor plans for 336 sqm preliminary building envelope.
Two attached independent residences with mirrored floor plans, separate entrances and utilities. Each unit has two upstairs bedrooms, a private ground-floor toilet and bath, a shared upper bathroom, kitchen and rear utility area.
Modern Tropical Duplex2 LevelsConcept Design StudyNC-HP-045
NC-HP-045
Modern Duplex with 2 Bedrooms per Unit
Modern Contemporary Design · Nillasca Construction House Plans
NILLASCA CONSTRUCTION
Original Nillasca design imagery used as an exterior style reference. Final facade must be coordinated with this sample’s floor plan.
2 independent homes2 bedrooms per unit2 bathrooms per unitMirrored duplex layoutSeparate entrances
2D Floor Plans & Furnished 3D Views
Explore the dimensioned concept plans, furnished 3D floor views, room schedules, and design considerations below.
Design study, not a construction drawing. The Nillasca exterior image is a visual direction reference; the original 2D/3D plans are preliminary and require licensed professional coordination before use.
Exterior massing illustration for design discussion. Appearance, layout, and engineering require coordination for the actual site.
150 sqmTotal conceptual gross floor envelope
10 × 7.5 mBuilding footprint (75.0 sqm)
168 sqmIllustrative lot: 12 × 14 m
2 Units4 T&B target
PRELIMINARY DESIGN SAMPLE — NOT FOR CONSTRUCTION. The layouts and dimensions here are preliminary concept drawings, not licensed/signed plans. Actual site setbacks, legal compliance, wall thickness, usable clearances, stairs, doors, utilities, waterproofing, structural systems and permit requirements require professional verification; recommended lot area does not guarantee buildability.
Ground Floor: Architectural-Style 2D and Furnished 3D
The dimensioned plan and 3D cutaway below share the same original room partition coordinates. Ground Floor shown as a preliminary design study; room clearances, doors and fixtures must be verified before any construction document is issued.
Ground Floor 2D presentation drawing with room dimensions, wall lines, indicative doors, windows and furniture.Ground Floor furnished 3D isometric view corresponding to the 2D layout.
View Ground Floor Room Dimension Schedule
Room / zone
Nominal size
Approx. area
Unit A: Living / Dining
5 × 3 m
15.0 sqm
Unit A: Kitchen
3.2 × 2.3 m
7.4 sqm
Unit A: Stairs
1.8 × 2.3 m
4.1 sqm
Unit A: Rear Utility
3.2 × 2.2 m
7.0 sqm
Unit A: T&B
1.8 × 2.2 m
4.0 sqm
Unit B: Living / Dining
5 × 3 m
15.0 sqm
Unit B: Kitchen
3.2 × 2.3 m
7.4 sqm
Unit B: Stairs
1.8 × 2.3 m
4.1 sqm
Unit B: Rear Utility
3.2 × 2.2 m
7.0 sqm
Unit B: T&B
1.8 × 2.2 m
4.0 sqm
Second Floor: Architectural-Style 2D and Furnished 3D
The dimensioned plan and 3D cutaway below share the same original room partition coordinates. Second Floor shown as a preliminary design study; room clearances, doors and fixtures must be verified before any construction document is issued.
Second Floor 2D presentation drawing with room dimensions, wall lines, indicative doors, windows and furniture.Second Floor furnished 3D isometric view corresponding to the 2D layout.
View Second Floor Room Dimension Schedule
Room / zone
Nominal size
Approx. area
Unit A: Bedroom 1
3.2 × 3 m
9.6 sqm
Unit A: Front Hall / Balcony
1.8 × 3 m
5.4 sqm
Unit A: Bedroom 2
3.2 × 2.3 m
7.4 sqm
Unit A: Stairs
1.8 × 2.3 m
4.1 sqm
Unit A: Family Nook
3.2 × 2.2 m
7.0 sqm
Unit A: T&B
1.8 × 2.2 m
4.0 sqm
Unit B: Bedroom 1
3.2 × 3 m
9.6 sqm
Unit B: Front Hall / Balcony
1.8 × 3 m
5.4 sqm
Unit B: Bedroom 2
3.2 × 2.3 m
7.4 sqm
Unit B: Stairs
1.8 × 2.3 m
4.1 sqm
Unit B: Family Nook
3.2 × 2.2 m
7.0 sqm
Unit B: T&B
1.8 × 2.2 m
4.0 sqm
Key Features & Design Intent
Two mirror-image self-contained units
Two bedrooms and two T&B per unit
Independent unit entrance and utilities
Stairs aligned between both levels
Front parking can be investigated in the lot's setback zone
Planning and Lot Requirements
The initial building envelope is 10 m wide × 7.5 m deep, with approximately 150 sqm combined floor plate area. The 12 × 14 m lot assumption is for early layout comparison only; a boundary survey, site orientation and applicable local zoning and building regulations must be reviewed.
Parking concept: Optional separate one-car frontage per unit. Actual frontage and parking requirements must be verified separately. Window locations and door swing marks are diagrammatic; they are not final door or window schedules.
Why This Layout Works
Two attached independent residences with mirrored floor plans, separate entrances and utilities. Each unit has two upstairs bedrooms, a private ground-floor toilet and bath, a shared upper bathroom, kitchen and rear utility area. The planning responds to modern tropical duplex aesthetics while seeking functional circulation, efficient room proportions, daylight and ventilation appropriate for Philippine residential use.
Next Design & Build Steps
For two attached homes with separate entrances, review our house and duplex construction services in Laguna. Discuss the actual lot, intended use, utilities, and design requirements before adapting this preliminary layout. Reference NC-HP-045 in your inquiry.
These preview visuals are illustrative. All structural/technical plans require authorized professional sign-off before permitting or construction.
