Original Townhouse with illustrated exterior and coordinated dimensioned 2D, furnished isometric 3D floor plans for 396 sqm preliminary building envelope.

← Return to House Plans Library

Original Nillasca Construction Townhouse Concept · NC-HP-050

Rental Townhouse Row with Balconies

Concept for 3 attached residential units with a modern exterior direction, individual dimensioned 2D floor layouts and matching furnished 3D isometric cutaway plans.

Exterior Design Perspective

NILLASCA CONSTRUCTIONMODERN · ORIGINAL EXTERIOR CONCEPT
Original conceptual exterior perspective, not a photo of an existing completed project.
396 sqmConcept gross envelope
315 sqmIllustrative lot
2Levels
3Residential units

Proposed illustrative lot envelope: 21 × 15 meters, subject to local setbacks, easements, road frontage, fire access and professional site investigation.

Preliminary design inspiration only. This gallery is not a set of signed architectural, structural, mechanical, electrical, plumbing or fire-safety plans. Room boundaries, wall thicknesses, egress, unit access, code-required parking, drainage and stairs have not been engineered or validated. Do not use these diagrams for construction or permit applications.

Ground Floor — 2D / 3D Plans

The 2D and 3D perspectives share the same spatial zones. Labels and dimension lines provide a starting point for discussion; all must be adjusted to the actual site and final design package.

Ground Floor · 2D SchematicPreliminary diagram, not for constructionUnit A Living6.0 × 4.4 mUnit A DiningKitchen3.8 × 3.5 mUnit A BathStair2.2 × 3.5 mUnit A Rear Service6.0 × 3.1 mUnit B Living6.0 × 4.4 mUnit B DiningKitchen3.8 × 3.5 mUnit B BathStair2.2 × 3.5 mUnit B Rear Service6.0 × 3.1 mUnit C Living6.0 × 4.4 mUnit C DiningKitchen3.8 × 3.5 mUnit C BathStair2.2 × 3.5 mUnit C Rear Service6.0 × 3.1 m18 m11 mRoom labels / dimensions approximate; professional design required
Dimensioned 2D room program with approximate openings and furniture symbols.
3D Furnished Isometric · Level 1Cutaway walls, furniture and floor surfaces correspond to the 2D room partitions18 m × 11 m schematic footprint
3D floor-plan view based on the same room geometry as the 2D plan; schematic model, not a finished BIM model.

Level 1 Room and Zone Schedule

ZoneApprox. width × depthApprox. zone area
Unit A Living6.0 × 4.4 m26.4 sqm
Unit A Dining/Kitchen3.8 × 3.5 m13.3 sqm
Unit A Bath/Stair2.2 × 3.5 m7.7 sqm
Unit A Rear Service6.0 × 3.1 m18.6 sqm
Unit B Living6.0 × 4.4 m26.4 sqm
Unit B Dining/Kitchen3.8 × 3.5 m13.3 sqm
Unit B Bath/Stair2.2 × 3.5 m7.7 sqm
Unit B Rear Service6.0 × 3.1 m18.6 sqm
Unit C Living6.0 × 4.4 m26.4 sqm
Unit C Dining/Kitchen3.8 × 3.5 m13.3 sqm
Unit C Bath/Stair2.2 × 3.5 m7.7 sqm
Unit C Rear Service6.0 × 3.1 m18.6 sqm

Second Floor — 2D / 3D Plans

The 2D and 3D perspectives share the same spatial zones. Labels and dimension lines provide a starting point for discussion; all must be adjusted to the actual site and final design package.

Second Floor · 2D SchematicPreliminary diagram, not for constructionUnit A Primary Bed6.0 × 4.5 mUnit A Second Bed3.8 × 4.0 mUnit A Bath2.2 × 4.0 mUnit A Balcony6.0 × 2.5 mUnit B Primary Bed6.0 × 4.5 mUnit B Second Bed3.8 × 4.0 mUnit B Bath2.2 × 4.0 mUnit B Balcony6.0 × 2.5 mUnit C Primary Bed6.0 × 4.5 mUnit C Second Bed3.8 × 4.0 mUnit C Bath2.2 × 4.0 mUnit C Balcony6.0 × 2.5 m18 m11 mRoom labels / dimensions approximate; professional design required
Dimensioned 2D room program with approximate openings and furniture symbols.
3D Furnished Isometric · Level 2Cutaway walls, furniture and floor surfaces correspond to the 2D room partitions18 m × 11 m schematic footprint
3D floor-plan view based on the same room geometry as the 2D plan; schematic model, not a finished BIM model.

Level 2 Room and Zone Schedule

ZoneApprox. width × depthApprox. zone area
Unit A Primary Bed6.0 × 4.5 m27.0 sqm
Unit A Second Bed3.8 × 4.0 m15.2 sqm
Unit A Bath2.2 × 4.0 m8.8 sqm
Unit A Balcony6.0 × 2.5 m15.0 sqm
Unit B Primary Bed6.0 × 4.5 m27.0 sqm
Unit B Second Bed3.8 × 4.0 m15.2 sqm
Unit B Bath2.2 × 4.0 m8.8 sqm
Unit B Balcony6.0 × 2.5 m15.0 sqm
Unit C Primary Bed6.0 × 4.5 m27.0 sqm
Unit C Second Bed3.8 × 4.0 m15.2 sqm
Unit C Bath2.2 × 4.0 m8.8 sqm
Unit C Balcony6.0 × 2.5 m15.0 sqm

Design Features and Planning Notes

Rental Townhouse Row with Balconies explores balconies through a functional townhouse composition. The facade is conceived as an original modern scheme using strong architectural volumes and well-positioned openings; exact materials and roof form should be coordinated during the architectural design stage.

  • Illustrative 18 m × 11 m per-level building envelope; conceptual total of 396 sqm.
  • 3 attached residential units, with 6 targeted bathroom zones across the planned building.
  • 2 coordinated furnished 3D plan views and matching 2D room diagrams.
  • Original Nillasca-branded exterior perspective for conceptual style review.
  • Future professional checks: lot survey, fire protection, independent circulation, ventilation, setbacks and structural framing.

Request a Professional Customized Plan

For a rental townhouse row with upper balconies, explore our rental-residential construction planning. Confirm the intended occupancy, balcony access, unit services and common responsibilities when adapting NC-HP-050.

The schematic lot and floor areas are not guaranteed buildable dimensions. Our team must confirm the existing lot conditions and your budget before preparing signed plans and formal construction estimates.

Get Preliminary Quotation · Materials & Specifications